来源于CSDN博客：https://blog.csdn.net/ErErFei/article/details/50998162 代码新增内容：在原博客的基础上，整合了各个类的方法，同时增添了SM3国密标准中的第二个案例的验证，并尝试将原代码中
来源于CSDN博客：https://blog.csdn.net/ErErFei/article/details/50998162
代码新增内容：在原博客的基础上，整合了各个类的方法，同时增添了SM3国密标准中的第二个案例的验证，并尝试将原代码中的缓冲区长度修改为64*2，本代码作者是在命令行里面运行通过的，未曾在eclipse环境中运行。如有运行问题，请各位能够反馈，互相学习；
public class ren_SM3
{
/**IV为256比特初始值，32个字节，修饰为静态最终变量，不可改变，比如0x80值（128）范围超过byte表示范围（-128~127），所以需要强制转换*/
private static final byte[] IV = { 0x73, (byte)0x80, 0x16, 0x6f, 0x49, 0x14, (byte) 0xb2, (byte) 0xb9, 0x17, 0x24, 0x42, (byte) 0xd7, (byte) 0xda, (byte) 0x8a, 0x06, 0x00, (byte) 0xa9, 0x6f, 0x30, (byte) 0xbc, (byte) 0x16, 0x31, 0x38, (byte) 0xaa, (byte) 0xe3, (byte) 0x8d, (byte) 0xee, 0x4d, (byte) 0xb0, (byte)0xfb, (byte)0x0e, 0x4e };
/**由于IV不可改变，而在64次迭代过程中需要一个不断改变的V，所以重新定义一个。*/
private byte[] V= IV.clone();
/** SM3分组长度 */
private static final int BLOCK_LENGTH = 64;
/** 缓冲区长度 */
private static final int BUFFER_LENGTH = BLOCK_LENGTH * 2;
/*缓冲区偏移量*/
private int xBufOff;
/*缓冲区，缓冲区长度是64,这个缓冲区指的什么？指的明文进入内存后，算法中要求需要将消息进行512比特分组,
然后对每组进行迭代，由于对消息原文是不能有改变的，所以需要将分组后的消息进行复制一份。*/
private byte[] xBuf = new byte[BUFFER_LENGTH];
private int cntBlock = 0;//用于记录明文分组的个数,计算消息长度时需要用到。
public static int[] Tj = new int[64];
static
{
for (int i = 0; i < 16; i++)
{
Tj[i] = 0x79cc4519;
}
for (int i = 16; i < 64; i++)
{
Tj[i] = 0x7a879d8a;
}
}
/*
*@param in明文输入缓冲区
*@param inOff明文输入缓冲区偏移量
*@param len明文输入长度
*/
public void update(byte[] in,int inOff)
{
int inputLen = in.length;//明文的长度
int dPos = inOff;//明文输入缓冲区偏移量,一开始是0
if(BUFFER_LENGTH<inputLen)//如果缓冲区长度小于明文长度
{
System.arraycopy(in,dPos,xBuf,0,BUFFER_LENGTH);
inputLen = inputLen - BUFFER_LENGTH;//明文输入长度减去进入缓冲区后剩下的长度
dPos = dPos+ BUFFER_LENGTH;
doUpdate();
while(inputLen>BUFFER_LENGTH)
{
System.arraycopy(in,dPos,xBuf,0,BUFFER_LENGTH);
inputLen = inputLen - BUFFER_LENGTH;
dPos = dPos+BUFFER_LENGTH;
doUpdate();
}
}
if(inputLen>0)
{
System.arraycopy(in,dPos,xBuf,0,inputLen);
xBufOff = inputLen;
}
}
public void doUpdate()//将缓冲区的内容复制到一份新的字节数组中。然后对字节数组作用。
{
byte [] B = new byte[BLOCK_LENGTH];
for(int i=0;i<BUFFER_LENGTH;i=i+BLOCK_LENGTH)
{
System.arraycopy(xBuf,i,B,0,BLOCK_LENGTH);
doHash(B);
}
xBufOff=0;
}
private void doHash(byte[] B)
{
V = CF(V,B);
//System.arraycopy(tmp,0,V,0,V.length);
cntBlock++;
}
private byte[] CF(byte[] V,byte[] B)
{
int[] v,b;
v = convert(V);
b = convert(B);
return convert(CF(v,b));
}
private int[] convert(byte[] arr)
{
int[] out = new int[arr.length/4];
byte[] tmp = new byte[4];
for(int i =0;i<arr.length;i+=4)
{
System.arraycopy(arr,i,tmp,0,4);
out[i/4]=bigEndianByteToInt(tmp);
}
return out;
}
private int bigEndianByteToInt(byte[] in)
{
int num = 0;
int temp;
temp = (0x000000ff & (in[3])) << 0;
num = num | temp;
temp = (0x000000ff & (in[2])) << 8;
num = num | temp;
temp = (0x000000ff & (in[1])) << 16;
num = num | temp;
temp = (0x000000ff & (in[0])) << 24;
num = num | temp;
return num;
}
public int[] CF(int[] v,int[] n)
{
int a,b,c,d,e,f,g,h;
int ss1,ss2,tt1,tt2;
a = v[0];
b=v[1];
c=v[2];
d=v[3];
e=v[4];
f=v[5];
g=v[6];
h=v[7];
System.out.println(getHexString(bigEndianIntToByte(a))+getHexString(bigEndianIntToByte(b))+" "
+getHexString(bigEndianIntToByte(c))+getHexString(bigEndianIntToByte(d))+" "
+getHexString(bigEndianIntToByte(e))+getHexString(bigEndianIntToByte(f))+" "
+getHexString(bigEndianIntToByte(g))+getHexString(bigEndianIntToByte(h)));
int[][]arr = expand(n);
int []W=arr[0];
int []W1 = arr[1];
System.out.println("扩展后W[]的值为：");
for(int j =0;j<68;j++)
{
System.out.print(getHexString(bigEndianIntToByte(W[j]))+" ");
if((j+1)%8==0)
System.out.println();
}
System.out.println();
System.out.println("扩展后W1[]的值为：");
for(int j =0;j<64;j++)
{
System.out.print(getHexString(bigEndianIntToByte(W[j]))+" ");
if((j+1)%8==0)
System.out.println();
}
System.out.println();
for(int j =0;j<64;j++)
{
ss1 = bitCycleLeft(a,12)+e+bitCycleLeft(Tj[j],j%32);
ss1 = bitCycleLeft(ss1,7);
ss2 = ss1^bitCycleLeft(a,12);
tt1 = FFj(a,b,c,j)+d+ss2+W1[j];
tt2 = GGj(e,f,g,j)+h+ss1+W[j];
d=c;
c = bitCycleLeft(b,9);
b=a;
a = tt1;
h=g;
g=bitCycleLeft(f,19);
f=e;
e=P0(tt2);
System.out.println(j+": "+getHexString(bigEndianIntToByte(a))+getHexString(bigEndianIntToByte(b))+" "
+getHexString(bigEndianIntToByte(c))+getHexString(bigEndianIntToByte(d))+" "
+getHexString(bigEndianIntToByte(e))+getHexString(bigEndianIntToByte(f))+" "
+getHexString(bigEndianIntToByte(g))+getHexString(bigEndianIntToByte(h)));
}
int []out = new int[8];
out[0] = a^v[0];
out[1] = b^v[1];
out[2] = c^v[2];
out[3]= d^v[3];
out[4] = e^v[4];
out[5] = f^v[5];
out[6] = g^v[6];
out[7] = h^v[7];
return out;
}
public int[][] expand(int[] b)
{
int []W =new int[68];
int[] W1 = new int[64];
for(int i=0;i<16;i++)
{
W[i] = b[i];
}
for(int i =16;i<68;i++)
{
W[i] = P1(W[i-16]^W[i-9]^bitCycleLeft(W[i-3],15))^bitCycleLeft(W[i-13],7)^W[i-6];
}
for(int i =0;i<64;i++)
{
W1[i] = W[i]^W[i+4];
}
int[][] arr = new int[][]{W,W1};
return arr;
}
public int bitCycleLeft(int target,int bitLen)
{
byte[] tmp = bigEndianIntToByte(target);
int byteLen = bitLen/8;
int len = bitLen%8;
if(byteLen>0)
{
tmp = byteCycleLeft(tmp,byteLen);
}
if(len>0)
{
tmp = bitSmall8CycleLeft(tmp,len);
}
return bigEndianByteToInt(tmp);
}
public byte[] bigEndianIntToByte(int n)
{
byte[] tmp = new byte[4];
tmp[3] = (byte)(n>>0);
tmp[2] = (byte)(n>>8);
tmp[1] = (byte)(n>>16);
tmp[0] = (byte)(n>>24);
return tmp;
}
public byte[] byteCycleLeft(byte[] in,int n)
{
byte[] tmp = new byte[in.length];
System.arraycopy(in, n, tmp, 0, in.length - n);
System.arraycopy(in, 0, tmp, in.length - n, n);
return tmp;
}
public byte[] bitSmall8CycleLeft(byte[] in,int n)
{
byte[] tmp = new byte[in.length];
int t1, t2, t3;
for(int j=0;j<tmp.length;j++)
{
t1 = (byte)((in[j])<<n);
t2 = (byte)(((in[(j+1)%tmp.length])&0x000000ff)>>(8-n));
t3 = (byte)(t1|t2);
tmp[j]=(byte)t3;
}
return tmp;
}
public int FFj(int a,int b ,int c,int j)
{
if(j>=0&&j<=15)
{
return a^b^c;
}
else
{
return (a&b)|(a&c)|(b&c);
}
}
public int GGj(int a,int b ,int c,int j)
{
if(j>=0&&j<=15)
{
return a^b^c;
}
else
{
return (a&b)|(~a&c);
}
}
public int P0(int a)
{
int tmp = a^bitCycleLeft(a,9)^bitCycleLeft(a,17);
return tmp;
}
public int P1(int a)
{
int tmp = a^bitCycleLeft(a,15)^bitCycleLeft(a,23);
return tmp;
}
public byte[] convert(int[] v)
{
byte[] out = new byte[v.length*4];
int[] in = new int[v.length];
for(int i=0;i<v.length;i++)
{
System.arraycopy(v,0,in,0,v.length);
out[4*i+3] = (byte)(in[i]>>0);
out[4*i+2] = (byte)(in[i]>>8);
out[4*i+1] = (byte)(in[i]>>16);
out[4*i+0] = (byte)(in[i]>>24);
}
return out;
}
public byte[] doFinal()
{
byte[] B= new byte[BLOCK_LENGTH];
byte[] buffer = new byte[xBufOff];
System.arraycopy(xBuf,0,buffer,0,buffer.length);
byte[] tmp = padding(buffer,cntBlock);
for(int i=0;i<tmp.length;i+=64)//此处填充后tmp长度可能为64*2，也可能为64
{
System.arraycopy(tmp,i,B,0,B.length);
doHash(B);
}
return V;
}
/*
*@param in需要填充的最后一组字节数组
*@param blen消息的分组次数
*return 填充后的字节数组,注意当填充前数组为64字节时，填充后数组会比原来多一组。
*/
public byte[] padding(byte[] in,int blen)
{
long l= blen*BUFFER_LENGTH*8+in.length*8;
int k = 448-(in.length*8+8)%512;
if(k<0)
{
k= 960-(in.length*8+8)%512;
}
byte[] padd=new byte[k/8+1];
padd[0]=(byte)0x80;
byte[] out = new byte[in.length+k/8+1+64/8];
int pos = 0;
System.arraycopy(in,0,out,pos,in.length);
pos = pos+in.length;
System.arraycopy(padd,0,out,pos,k/8+1);
pos = pos+k/8+1;
byte[] tmp = longToBytes(l);
System.arraycopy(tmp,0,out,pos,64/8);
return out;
}
public byte[] longToBytes(long n)
{
byte[] bytes = new byte[8];
for(int i=0;i<8;i++)
{
bytes[7-i] = (byte)(0xff&(n>>(i*8)));
}
return bytes;
}
public String getHexString(byte[] bt)
{
String str = "";
for(int i = 0;i<bt.length;i++)
{
str+=String.format("%02x",bt[i]&0xff);
if(i%4==3)
str+=" ";
}
return str;
}
public static void main(String[] args)
{
byte[] md = new byte[32];
byte[] msg1 = {0x61,0x62,0x63};
ren1_SM3 sm3 = new ren1_SM3();
sm3.update(msg1, 0);
md = sm3.doFinal();
System.out.println("第一个例子的摘要值为"+sm3.getHexString(md));
byte[] msg2 = {0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,
0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,
0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,
0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64,0x61,0x62,0x63,0x64};
ren1_SM3 sm3_1 = new ren1_SM3();
sm3_1.update(msg2, 0);
md = sm3_1.doFinal();
System.out.println("第二个例子的摘要值为"+sm3_1.getHexString(md));
}
}