当前位置 : 主页 > 网络编程 > 其它编程 >

dockercompose部署主从复制的实现_docker

来源:互联网 收集:自由互联 发布时间:2023-07-02
本文记录了通过dockercompose搭建一主双从的Redis服务。文中通过示例代码介绍的非常详细,具有一定的参考价值,感兴趣的 目录 配置解析 服务搭建 目录结构 Compose File 实例配置 启动服务
本文记录了通过dockercompose搭建一主双从的Redis服务。文中通过示例代码介绍的非常详细,具有一定的参考价值,感兴趣的
目录
  • 配置解析
  • 服务搭建
    • 目录结构
    • Compose File
    • 实例配置
    • 启动服务
    • 测试

受限于 Redis 单点性能,加上我们对数据天生就有的备份的需求,因此 Redis 提供了主从复制的服务。

本文记录了通过 docker compose 搭建一主双从的 Redis 服务。

配置解析

################################# REPLICATION ################################## 【Slave】连接 Master 的配置# slaveof 172.25.0.101 6379# 【Slave】只读模式# slave-read-only yes# 【Slave】密码# masterauth # 【Slave】复制期间是否允许响应查询,可能会返回脏数据# slave-serve-stale-data yes# 【Slave】Slave 晋级为 Master 的优先级,仅哨兵模式下生效# slave-priority 100# 【Slave】Slave 向 Master 报告的自己的 IP# slave-announce-ip 5.5.5.5# 【Slave】Slave 向 Master 报告的自己的端口# slave-announce-port 1234# 【Slave】Slave ping Master 的时间间隔# repl-ping-slave-period 10# 【Master/Slave】超时时间# repl-timeout 60# 【Master】Diskless 就是直接将要复制的 RDB 文件写入到 Socket 中,而不会先存储到磁盘上repl-diskless-sync no# 【Master】若开启 Diskless,会等待指定秒之后再进行复制,以便让更多客户端可以在窗口期内连接,并行传送# repl-diskless-sync-delay 5# 【Master】是否开启 Nagle 算法,可以减少流量占用,但会同步得慢些repl-disable-tcp-nodelay no# 【Master】环形缓冲日志的大小,给 Slave 断开之后重连使用,避免全量复制,默认 1mb# repl-backlog-size 1mb# 【Master】当 Master 断连所有 Slave 指定时间后,Master 会清空 backlog# repl-backlog-ttl 3600# 【Master】当低于指定个 Slave 连接时,Master 拒绝所有写操作# min-slaves-to-write 3# 【Master】当延迟高于指定秒数时,Master 拒绝所有写操作# min-slaves-max-lag 10

服务搭建

目录结构

replication/├── docker-compose.yml├── master│ ├── data│ └── redis.conf├── slave1│ ├── data│ └── redis.conf└── slave2 ├── data └── redis.conf

Compose File

定义了一个子网,方便操作,对外暴露 6371(Master)、6372、6373 端口。

version: "3"networks: redis-replication: driver: bridge ipam: config: - subnet: 172.25.0.0/24services: master: image: redis container_name: redis-master ports: - "6371:6379" volumes: - "./master/redis.conf:/etc/redis.conf" - "./master/data:/data" command: ["redis-server", "/etc/redis.conf"] restart: always networks: redis-replication: ipv4_address: 172.25.0.101 slave1: image: redis container_name: redis-slave-1 ports: - "6372:6379" volumes: - "./slave1/redis.conf:/etc/redis.conf" - "./slave1/data:/data" command: ["redis-server", "/etc/redis.conf"] restart: always networks: redis-replication: ipv4_address: 172.25.0.102 slave2: image: redis container_name: redis-slave-2 ports: - "6373:6379" volumes: - "./slave2/redis.conf:/etc/redis.conf" - "./slave2/data:/data" command: ["redis-server", "/etc/redis.conf"] restart: always networks: redis-replication: ipv4_address: 172.25.0.103

实例配置

Master:

基本不用配置,最简单的是指定一个端口就好了。

port 6379protected-mode norepl-diskless-sync norepl-disable-tcp-nodelay no

Slave:

实例的配置保持一致就可以了,因为定义了子网,不存在端口冲突。

port 6379protected-mode noslaveof 172.25.0.101 6379slave-read-only yesslave-serve-stale-data yes

启动服务

ocker-compose up -dCreating network "replication_redis-replication" with driver "bridge"Creating redis-slave-1 ... doneCreating redis-master ... doneCreating redis-slave-2 ... done

查看 Master 日志,可以看到接受了两个 Slave 的复制请求:

1:M 18 Aug 2021 15:50:31.772 * Replica 172.25.0.102:6379 asks for synchronization1:M 18 Aug 2021 15:50:31.772 * Full resync requested by replica 172.25.0.102:63791:M 18 Aug 2021 15:50:31.772 * Replication backlog created, my new replication IDs are '5d27746f14ee9be9694d794f96de6ba14a669dd1' and '0000000000000000000000000000000000000000'1:M 18 Aug 2021 15:50:31.772 * Starting BGSAVE for SYNC with target: disk1:M 18 Aug 2021 15:50:31.773 * Background saving started by pid 1919:C 18 Aug 2021 15:50:31.777 * DB saved on disk19:C 18 Aug 2021 15:50:31.777 * RDB: 0 MB of memory used by copy-on-write1:M 18 Aug 2021 15:50:31.822 * Background saving terminated with success1:M 18 Aug 2021 15:50:31.823 * Synchronization with replica 172.25.0.102:6379 succeeded1:M 18 Aug 2021 15:50:32.170 * Replica 172.25.0.103:6379 asks for synchronization1:M 18 Aug 2021 15:50:32.170 * Full resync requested by replica 172.25.0.103:63791:M 18 Aug 2021 15:50:32.170 * Starting BGSAVE for SYNC with target: disk1:M 18 Aug 2021 15:50:32.171 * Background saving started by pid 2020:C 18 Aug 2021 15:50:32.175 * DB saved on disk20:C 18 Aug 2021 15:50:32.175 * RDB: 0 MB of memory used by copy-on-write1:M 18 Aug 2021 15:50:32.225 * Background saving terminated with success1:M 18 Aug 2021 15:50:32.226 * Synchronization with replica 172.25.0.103:6379 succeeded

查看 Slave 日志,可以看到连接建立的全过程:

1:S 18 Aug 2021 15:50:31.771 * Connecting to MASTER 172.25.0.101:63791:S 18 Aug 2021 15:50:31.771 * MASTER REPLICA sync started1:S 18 Aug 2021 15:50:31.771 * Non blocking connect for SYNC fired the event.1:S 18 Aug 2021 15:50:31.771 * Master replied to PING, replication can continue...1:S 18 Aug 2021 15:50:31.772 * Partial resynchronization not possible (no cached master)1:S 18 Aug 2021 15:50:31.773 * Full resync from master: 5d27746f14ee9be9694d794f96de6ba14a669dd1:01:S 18 Aug 2021 15:50:31.823 * MASTER REPLICA sync: receiving 175 bytes from master to disk1:S 18 Aug 2021 15:50:31.823 * MASTER REPLICA sync: Flushing old data1:S 18 Aug 2021 15:50:31.823 * MASTER REPLICA sync: Loading DB in memory1:S 18 Aug 2021 15:50:31.828 * Loading RDB produced by version 6.2.51:S 18 Aug 2021 15:50:31.828 * RDB age 0 seconds1:S 18 Aug 2021 15:50:31.828 * RDB memory usage when created 1.83 Mb1:S 18 Aug 2021 15:50:31.829 * MASTER REPLICA sync: Finished with success

测试

登录 Master,尝试写入新 Key。

127.0.0.1:6371> set hello worldOK

登录 Slave,查看能否读取到:

127.0.0.1:6372> get hello"world"

Slave 尝试写操作:

127.0.0.1:6372> set hello redis(error) READONLY You can't write against a read only replica.
上一篇:机器学习之线性回归python实现
下一篇:没有了
网友评论